/Uploads/832019241.jpg

General Purpose

Unsaturated polyester resin for FRP hand layup, filament winding, fiber spraying applications, having high Heat Distortion Temperature and mechanical values. Best results Best results can be achieved from the production of car, bus and truck body parts, sea vessels, aquaparks, modular cabins, construction materials, storage tanks and decorative FRP furnitures.

P-192 ORTHO unsaturated polyester resin for GRP applications
PROPERTIES FIELD OF APPLICATION TECHNICAL PROPERTIES MECHANICAL PROPERTIES(**)
Easy and quick fiber wetting Car,bus and truck body parts Chemical base Orthophthalic Tensile strength (MPa) 60-70
Low volumetric shrinkage Boats and other sea vehicles Application Hand lay-up 
Filament winding
Tensine elongation (%) 1-2
  Modular cabinet Viscosity (cps) 550 -650  Tensile E-modulues (MPa) 4000-5000
  Water tank Thixotropy No Flexural strength (MPa) 170-180
  Decorative FRP furniture Density (g/cm3) 1,12 - 1,14 Hardness (GYZJ 934-1) 40-42
  Construction materials Monomer content (%) 33 - 35 Heat distortion temperature (C) 58-61
    Acid value (mgKOH/g) 18-25 Water absorption (mg) 29-31
    Gel time (min) 10-18 (*)    
    Exothermic peak (C) 160-200 (*)    
    Curing system (*) 1% Co(1%)+1%MEK P    
P-192 TA ORTHO unsaturated polyester resin for GRP applications
PROPERTIES FIELD OF APPLICATION TECHNICAL PROPERTIES MECHANICAL PROPERTIES(**)
Easy and quick fiber wetting  Cars,bus and truck body parts Chemical base Orthophthalic Tensile strength (MPa) 55 – 65
Low volumetric shrinkage Boats and other sea vehicles Application Hand lay-up
Spray-up
Filament winding
Tensile elongation (%) 1-2
No dripping during vertical application Modular cabinet Thixotropy Yes Tensile E-modulus (MPa) 4000-5000
  Water tank Viscosity (cps)  500 – 1000 Flexural strength (MPa) 140 – 150 
  Decorative FRP furniture Density(g/cm3)  20°C 1,11 – 1,12  Hardness (GYZJ 934-1) 40-42
  Construction materials Monomer content (%) 38 – 40  Heat distortion temperature (°C) 72 – 75
    Acid value (mgKOH/g) 18-25 Water absorption (mg) 36 – 38
    Gel time (min) 10-18 (*)    
    Exothermic peak (°C) 160-200 (*)    
    Curing system (*) 1% MEK-P, pre-accelerated (**) Test applied after post cure application

Comments

Can be produced as unaccelerated upon request

P-1920 ORTHO unsaturated polyester resin for GRP applications
PROPERTIES FIELD OF APPLICATION TECHNICAL PROPERTIES MECHANICAL PROPERTIES(**)
Easy and quick fiber wetting Car,bus and truck body parts Chemical base Orthophthalic Tensile strength (MPa) 60-70
Low volumetric shrinkage Boats and other sea vehicles Application Hand lay-up 
Filament winding
Tensine elongation (%) 1-2
  Modular cabinet Viscosity (cps) 550 -650  Tensile E-modulues (MPa) 4000-5000
  Water tank Thixotropy No Flexural strength (MPa) 170-180
  Decorative FRP furniture Density g(cm3) 1,12 - 1,14 Hardness (GYZJ 934-1) 40-42
  Construction materials Monomer content (%) 33 - 35 Heat distortion temperature (C) 58-61
    Acid value (mgKOH/g) 18-25 Water absorption (mg) 29-31
    Gel time (min) 10-18 (*)    
    Exothermic peak (C) 160-200 (*)    
    Curing system (*) 1% Co(1%)+1%MEK P    
P-116 ORTHO unsaturated polyester resin for GRP applications
PROPERTIES FIELD OF APPLICATION TECHNICAL PROPERTIES MECHANICAL PROPERTIES(**)
Easy and quick fiber wetting Car,bus and truck body parts Chemical base Orthophthalic Tensile strength (MPa) 55-65
Highly reactive Boats and other sea vehicles Application Hand lay-up
Filament winding
Tensile elongation (%) 1-2
High mechanical strength Modular cabinet Viscosity (cps) 350 - 400 Tensile E-modulus (MPa) 4000-5000
Suitable for mass production Water tank Thixotropy No Flexural strength (MPa) 140-150
  Decorative FRP furniture Density(g/cm3)  20°C 1,10 – 1,12   Hardness (GYZJ 934-1) 40-42
  Construction materials Monomer content (%) 38 - 40  Heat distortion temperature (°C) 72 - 75
    Acid value (mgKOH/g) 18 - 24 Water absorption (mg) 36 - 38
    Gel time (min) 10 - 15 (*)    
    Exothermic peak (C) 165 - 185(*)    
    Curing system (*) 1% Co(1%)+1%MEK P (**) Tests applied after post cure application
P-1016 ORTHO unsaturated polyester resin for GRP applications
PROPERTIES FIELD OF APPLICATION TECHNICAL PROPERTIES MECHANICAL PROPERTIES(**)
Easy and quick fiber wetting Car,bus and truck body parts Chemical base Orthophthalic Tensile strength (MPa) 55-65
Highly reactive Boats and other sea vehicles Application Hand lay-up
Spray-up
Filament winding
Tensine elongation (%) 1 - 2
Highly mechanical strength Modular cabinet Viscosity (cps) 750- 1100 Tensile E-modulues (MPa) 4000-5000
Suitable for mass production Water tank Thixotropy Yes Flexural strength (MPa) 140 - 150
  Decorative FRP furniture Density(gr/cm3 1,10 – 1,11   Hardness (GYZJ 934-1) 40 - 42
  Construction materials Monomer content (%) 39 - 41 Heat distortion temperature (°C) 72 - 75
    Acid value (mgKOH/g) 18 - 24 Water absorption (mg) 36 - 38
    Gel time (min) 10 - 15 (*)    
    Exothermic peak (°C) 165 - 185 (*)    
    Curing system (*) 1% Co(1%)+1%MEK P (**) Test applied after post cure application


Comments

Pre-accelerated type can be produced upon request

P-1017 ETPS ORTHO thixotropic low styrene emission GRP type resin
PROPERTIES FIELD OF APPLICATION TECHNICAL PROPERTIES MECHANICAL PROPERTIES(**)
Easy and quick fiber wetting Car,bus and truck body parts Chemical base Orthophthalic Tensile strength (MPa) 55 - 65
Low volumetric shrinkage Boats and other sea vehicles Application Hand lay-up
Spray-up
Filament winding
Tensine elongation (%) 1 - 2
High mechanical strength  Pool filter Viscosity (cps) 500 - 1000 Tensile E-modulues (MPa) 4000-5000
No dripping during vertical application Modular cabinet Thixotropy Yes Flexural strength (MPa) 85 - 95
Accepts up to 20% fiber filling Decorative FRP furniture Density (g/cm 3) 1,10 – 1,12 Hardness (GYZJ 934-1) 40 - 42
  Construction materials Monomer content (%) 39 - 41  Heat distortion temperature (°C) 67 - 70
    Acid value (mgKOH/g) 18 - 30 Water absorption (mg) 30 - 32
    Gel time (min) 15 - 25 (*)    
    Exothermic peak (°C) 160 - 185 (*)    
    Curing system (*) 1% MEK P, pre-accelerated (**) Test applied after post cure application


Comments

Contains blue color MEK P indicator

P-192 BS ORTHO unsaturated polyester resin for gratings applications
P-920 ORTHO unsaturated polyester resin for module productions