Owing to its chemical structure, high HDT and mechanical values, this resin group is resistant to high temperature, chemical and corrosive mediums. UV resistancy characteristic can also be provided. Resins in this group have wide range of consumption purposes for producing chemical material storage tanks, pipes, fuel disposal storage tanks, transportation tanks and sea vessels.
| IR-100 | ISO GRP type polyester resin |
| IR-100 TA | ISO thixotropic pre-accelerated GRP type polyester resin |
| INR 551 UV | ISO/NPG reactive GRP type polyester resin |
| PV-300 TA | Bisphenol-A epoxy vinylester thixotropic pre-accelerated resin for GRP applications |
| IR-100 | ISO unsaturated polyester resin for GRP applications |
| PROPERTIES | FIELD OF APPLICATION | TECHNICAL PROPERTIES | MECHANICAL PROPERTIES(**) | ||
|---|---|---|---|---|---|
| Easy and quick fiber wetting | Car, bus and truck body parts | Chemical base | Isophthalic | Tensile strength (MPa) | 60 - 70 |
| Low volumetric shrinkage | Boats and other sea vehicle | Application | Hand lay-up Filament winding |
Tensile elongation (%) | 1 - 2 |
| Resistant to chemical medium | Chemical material storage tanks | Viscosity (cps) | 750 - 900 | Tensile E-modulus (MPa) | 4000-5000 |
| High mechanical strength and HDT |
GRP pipes | Thixotropy | No | Flexural strength (MPa) | 130- 140 |
| Construction materials | Density(g/cm³) | 1,10 - 1,12 | Hardness (GYZJ 934-1) | 40 - 42 | |
| Monomer content (%) | 33 – 45 | Heat distortion temperature (°C) | 76 - 79 | ||
| Acid value (mgKOH/g) | 11 - 20 | Water absorption (mg) | 37 - 39 | ||
| Gel time (min) | 10 - 18 (*) | ||||
| Exothermic peak (°C) | 175 - 185 (*) | ||||
| Curing system (*) | 1% Co(1%)+1% MEK P | (**) Test applied after post cure application | |||
| IR-110 T | ISO thixotropic polyester resin for GRP applications |
| PROPERTIES | FIELD OF APPLICATION | TECHNICAL PROPERTIES | MECHANICAL PROPERTIES(**) | ||
|---|---|---|---|---|---|
| High UV and environmental strength | Pools and water slide equipments | Chemical base | Isophthalic | Tensile strength (MPa) | 55 - 65 |
| High mechanical strength and HDT | Car, bus and truck body parts | Application | Hand lay-up Spray-up |
Tensine elongation (%) | 1 - 2 |
| Resistant to chemical environment | Boats and other sea vehicle | Viscosity (cps) | 500 - 1000 | Tensile E-modulus (MPa) | 4000-5000 |
| Easy and quick fiber wetting | Chemical material storage tanks | Thixotropy | Yes | Flexural strength (MPa) | 95 - 105 |
| No dripping during vertical application |
Pool filters | Density(g/cm³) | 1,07 - 1,09 | Hardness (GYZJ 934-1) | 40 - 42 |
| Construction materials | Monomer content (%) | 43 – 45 | Heat distortion temperature (°C) | 85 - 88 | |
| Acid value (mgKOH/g) | 11 - 20 | Water absorption (mg) | 33 - 35 | ||
| Gel time (min) | 10 - 18 (*) | ||||
| Exothermic peak (°C) | 170 - 180(*) | ||||
| Curing system (*) | 1% MEK P, pre-accelerated | (**) Test applied after post cure application | |||
| PV-200 | Bisphenol-A epoxy vinylester resin for GRP applications |
| PROPERTIES | FIELD OF APPLICATION | TECHNICAL PROPERTIES | MECHANICAL PROPERTIES(**) | ||
|---|---|---|---|---|---|
| Easy and quick fiber wetting | Boats, yachts and other sea vehicles | Chemical base | Vinylester | Tensile strength (MPa) | 70 - 80 |
| Low volumetric shrinkage | Wind turbine blades | Application | Infusion Hand lay-up Filament winding |
Tensine elongation (%) | 2,5 - 3,5 |
| Resistance to high temperatures and different thermal environment |
Chemical material storage tanks | Viscosity (cps) | 150- 200 | Tensile E-modulus (MPa) | 3000-4000 |
| High corrosion resistance in a wide variety of acidic and alkaline medium |
Transportation tanks, pipes and fittings | Thixotropy | No | Flexural strength (MPa) | 150 - 160 |
| High mechanical strength and HDT | Special military and defense applications | Density (g/cm³) | 1,05 - 1,06 | Hardness (GYZJ 934-1) | 30 - 32 |
| High resistance towards osmosis | Construction materials | Monomer content (%) | 41 – 43 | Heat distortion temperature (°C) | 95 - 98 |
| Acid value (mgKOH/g) | Max. 7 | Water absorption (mg) | 34 - 36 | ||
| Gel time (min) | 20 - 30(*) | ||||
| Exothermic peak (°C) | 160 - 170 (*) | ||||
| Curing system (*) | 0.5% Co(6%)+2%MEK P | (**) Test applied after post cure application | |||